LOOP-IT Zip-Clip 300kg
The range consists of a pre-determined length of wire from 1 metre to 10 metres with a choice of Safe Working Load. The system consists of wire rope and zip-clip locking devices with a ferruled loop termination. LOOP-IT Zip-Clip 300kg is a popular suspension wire system for building services.
LOOP-IT Zip-Clip 300kg is fixed at the top by passing the wire around the panels and through the formed wire mesh, then attached to the suspended element by creating a loop at the bottom of the wire using a Zip-Clip clip. If an installation is subject to balancing, it is removed by attaching the Zip-Loop-IT wires at strategic points on the side of the installation.
Suitable for wrap-around applications including:
Other existing structures capable of supporting a load;
Couple together with fixing or bracket that has suitable through hole or eye.
Key free release system for adjustment;
Simple to use;
Versatile – can be used in conjunction with other fixing and adapters;
Suspension can be inverted;
High tensile galvanised wire 1960N/mm² grade 7 x 7 construction;
BSEN 12385 standard.
Pass the wire around the purlin or beam;
Pass the free end of the wire through the loop to form a choke knot;
Pass the wire through the zip-clip in the direction of the arrow;
Pass the wire through or around the required suspension and back through the zip-clip leaving 15 cm of wire protruding;
Always confirm engagement of the zip-clip on the wire by pushing the pin in the opposite direction to the arrows indicated.
Safe working loads: G 15kg S 50kg Y 90kg P 300kg N 500kg.